|
 |
Dremel Chucks, Collets, Drill bits, Mandrels & Brushes |
|
Operating hours for walk in customers are by appointment only.
Please call 479-787-7673
We now have a new web store!
All antiques have been moved to our new store which has a .net address of:
www.shop.roseantiquetools.net
|
|
|
New Dremel # 90828 Carbon Motor Brush One pair of motor brushes for use with Dremel rotary tool model(s): 232, 332 only |
|
|
New Dremel #150 Drill Bit 1/8" Ideal for drilling into soft materials.
|
|
|
New Dremel #401 Mandrel for polishing wheels
A shank with a threaded head. It is used primarily with polishing bits and accessories.
|
|
|
New genuine Dremel #402 Mandrel only for sanding discs & cutoff wheels Simply remove the screw, line up a cut-off wheel or sanding band over the hole in the shank, and replace and tighten the screw.
|
|
|
New Dremel #415 Dressing Stone A solid block of extremely hard abrasive measures approx. 1"x3/8". Ideal for cleaning and reshaping grinding stones for specific applications.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto.- Abrasive accessories will wear out and change shape during use. Its a good idea to balance abrasive points and grinding stones before each use.- To rebalance a worn accessory, place the dressing stone in a vise to hold it in place. After making sure the accessory is mounted securely in the tool, turn on the tool and file the point or grinding stone against the dressing stone to the desired shape.
|
|
|
New Genuine Dremel #4485 Collet Nut Kit consisting of a special collet nut and four collets for use with a variety of Dremel® tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8".
TOOL MODELS USING THIS KIT
#275, 285, 370*, 380*, 395, 595*, 850*, 750*, 232*, 332*, 241*, 246*, 277* and 8504*.
#245* and 250*, Series 3 and later.
#260*, 270* and 280*, Series 2 and later.
ATTACHMENTS USING THIS KIT
#225 Flex-Shaft Attachment
#90199* Flexible Shaft Attachment
HANDPIECES USING THIS KIT
#235 (1/2" diameter)
#237 (3/4" diameter)
* Discontinued |
|
|
New genuine Dremel chuck number 4486. The Dremel Chuck allows you to quickly and easily change accessory bits on Dremel rotary tools without changing collets. It will accept all accessory bits with 1/32" to 1/8" shanks. Use with rotary tool models 275, 285, 395, 398, 750, 770, and 780. Also use with Dremel attachments 212, 225, 575, and 961.
|
|
|
New Dremel #480 1/8" Collet A slim, aluminum tube for holding a bit. Provides the optimal grip for bits offered for our rotary tool line and Heavy-Duty Flex-Shaft Tool.
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto.
- This collet is not suitable for the #236 handpiece.
- The collet features small identification rings around its shank. These rings correspond with the size of the collet:
0 rings = 1/8
3 rings = 3/32
2 rings = 1/16
1 ring = 1/32
|
|
|
New Dremel #481 3/32" Collet A slim, aluminum tube for holding a bit. Provides the optimal grip for bits offered for our rotary tool line and Heavy-Duty Flex-Shaft Tool.
- For best results, insert an accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet to hold onto.- This collet is not suitable for the #236 handpiece.
- Collets feature small identification rings around their shanks. These rings correspond with the size of the collet:
0 rings = 1/8
3 rings = 3/32
2 rings = 1/16
1 ring = 1/32
|
|
|
New Dremel #482 1/16" Collet A slim, aluminum tube for holding a bit. Provides the optimal grip for bits offered for our rotary tool line and Heavy-Duty Flex-Shaft Tool.
- For best results, insert an accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet to hold onto.- This collet is not suitable for the #236 handpiece.- Collets feature small identification rings around their shanks. These rings correspond with the size of the collet:
0 rings = 1/8
3 rings = 3/32
2 rings = 1/16
1 ring = 1/32
|
|
|
New Dremel #483 1/32" Collet A slim, aluminum socket for holding a bit. Provides the optimal grip for bits offered for our rotary tool line and Heavy-Duty Flex-Shaft Tool.
- For best results, insert an accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet to hold onto.- This collet is not suitable for the #236 handpiece.- Collets feature small identification rings around their shanks. These rings correspond with the size of the collet:
0 rings = 1/8
3 rings = 3/32
2 rings = 1/16
1 ring = 1/32
|
|
|
New Dremel #628 seven piece mini drill bit set
INCLUDES
- 1/32" drill bit (use #483 collet not included)
- 3/64" drill bit (use #483 collet not included)
- 1/16" drill bit (use #482 collet not included)
- 5/64" drill bit (use #481 colletnot included )
- 3/32" drill bit (use #481 collet not included)
- 7/64" drill bit (use #480 collet not included)
- 1/8" drill bit (use #480 colletnot included ) |
|
|
New Dremel 660 drill bits, A set of four 1/32" high-speed drill bit ideal for drilling into wood, plastics and soft metals.
Bit Diamter mm: 0,8 mm
Bit Diameter Inch: 1/32"
Item Description: 1/32" Drill Bit |
|
|
New Dremel #661 3/64 Drill Bits 4 in one package
A set of four high-speed drill bits made from high-grade steel. Use with the number 483 collet which is sold seperately in my ebay store Ideal for precise drilling applications and soft materials
|
|
|
|
90827 Carbon Motor Brush for these tool models only One pair of motor brushes for use with Dremel rotary tool model(s): 270, 280, 370, 380. |
|
|
New Dremel 90929 Carbon Motor Brush One pair of motor brushes for use with Dremel rotary tool model(s): 275*, 285*, 395* (Type 1,2) only. |
|
|
|
New Genuine Dremel motor brushes for use with Models 100, 200, 275, 285, 300, 395, 595 Types 4*, 5* and 6 only dremel has redesigned these so may look a little different than your old ones. THESE WILL NOT FIT A TYPE 3 . They can also be used with the Dremel® Contour Sander (Type 1 and 2). item 90930-04 Motor brushes consist of a coiled spring of metal with a piece of carbon at the end. They go under the brush cap and rest on the armature, providing the electrical connection to keep the tool running. These easily replaceable accessories also help extend the life of the tool. You should check both motor brushes after every 50-60 hours of use. Simply unplug the tool, open the brush caps and remove the carbon piece from the holder. If there is less than 1/8" of carbon left on either brush, they both should be replaced.
|
|
|
|
New genuine Dremel replacement parts One pair of motor brushes for use with the Dremel model 398 rotary tool brush only no springs
Restore life to your corded Dremel rotary tool!
For use with Dremel rotary tool model(s): 398 |
|
| Dremel EZ 402 Lock Mandrel |
| $9.99 |
|
|
|
|
The Dremel EZ Lock makes accessory changes easy as PULL - TWIST - RELEASE. The one-piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. The EZ402 Mandrel is for use with exclusive EZ Lock Accessories. Features
One-piece mandrel design eliminates the need for screw
Compatible with all Dremel rotary tools
First patented system of its kind |
|
|
|
Welcome to Rose Tools, Inc also known as Rose Antique Tools. We are a different kind of website which mixes the antique tools with the new tools. We are an authorized dealer for Dremel, Bosch, Rotozip, Skill and Flexcut tools.
We have been selling tools online since 2001 and have shipped all over the world!
We have even sold tools to Universal Studios for a movie that was released in 2007 called "Evan Almighty".
Operating hours are Monday-Friday from 8-5 cst and weekends by appointment only.
If you have questions you can reach us by phone
479-787-7673 CST
You can also reach us by email at Rose Tools, Inc.
We do not do appraisals of any kind. If you need information on a tool try visiting our main website at www.roseantiquetools.com we have several old tool catalogs which we have scanned and saved to adobe pdf form, to help you in identifying your old tools
Rose Tools Inc. is located at: 15086 Fielding Road Gravette, Arkansas 72736
Payment address: Rose Tools, Inc. PO Box 147 Hiwasse, Arkansas 72739
WE SHIP WORLDWIDE!!
We ship via United States Postal Service only
All Arkansas residents there will be 7% sales tax
Payment Terms: We accept several payments which include: Visa, Master Card, Diners Club, Discover, American Express and Paypal. The following are also accepted forms of payment: money orders, cashier checks and personal checks.
Before paying with paypal please let us know first, so we can confirm that the item is in stock for you
Terms of Use: Please note that there may be certain orders that we are unable to accept and must cancel. Rose Tools, Inc. has the right, at our sole discretion, to refuse or cancel any order for any reason. For your convenience, you will not be charged until your payment method is authorized, the order information is verified for accuracy and your order is shipped. Some situations that may result in your order being canceled include limitations on quantities available for purchase, inaccuracies or errors in product or pricing information, or problems identified by the credit card company. Rose Tools, Inc. may also require additional verifications or information before accepting any order. Rose Tools, Inc. will contact you if all or any portion of your order is canceled or if additional information is required to accept your order. If your order is canceled after your credit card has been charged, we will issue a credit to your credit card in the amount of the charge. In the event that an item is listed at an incorrect price or with incorrect information due to an error in pricing or product information, Rose Tools, Inc. shall have the right, at our sole discretion, to refuse or cancel any orders placed for that item. In the event that an item is mis-priced, Rose Tools, Inc. may, at our discretion, either contact you for instructions or cancel your order and notify you of such cancellation.
|
|
